Flexi Phone Holder

Description

The Flexi Phone Holder allows you to attach your phone, tablet, DSLR camera or gaming controller to your wheelchair hands-free! Navigate around the streets with your phone safely held in front of you. Position a tablet flat for typing or at an angle for watching TV. Hold the camera steady while you take the perfect shot. Keep your controller in place while you game.

FidLock Vacuum System

The Fidlock vacuum system locks your phone in place using magnets to locate and a vacuum seal to hold it tightly. This firm hold reduces the chance of a passer-by stealing your phone. No more dropping your phone off your lap while wheeling around. You will need to attach a phone patch to the back of your device or case. One phone patch is included with your Flexi Phone Holder. Additional phone patches can be purchased if you wish to use it with multiple devices.

Flexible Loc-Line

The flexible loc-line system allows you to adjust your gadget so that it sits just where you want it. You can move the links to position items and they stay in place. You can add or remove links to get the perfect length (you may need assistance with this, if you have reduced hand function, as the links require some force to detach and clip back together).

Additional lengths of Loc-Line are available in packs of 10 if you need to attach your Flexi Phone Holder behind your chair or further down the legs. Please be aware that the longer you make it the more likely it is to droop when you are on bumpy ground.

When using the Flexi Holder for your tablet, we advise using a second phone holder for a firmer hold.

Easy-to-Fasten Clamp

The clamp can be tightened easily by those with reduced hand function using the sliding bar. You can remove it easily when putting your wheelchair into the car. The clamp works well when fastened around a tube but you can also use it to attach to a desk, table or shelf.

Which Length Do I Need?

The Flexi Phone Holder comes in two lengths – standard and long. The long version has an extra 10 links in it and measures 63cm (25 inches) from the centre of the clamp to the vacuum seal. You may want to use the longer version if it is a long way from your fixing point to where you want to position your phone. Or if you want to use a camera at eye level. If you need to fix the clamp from the back of your chair, the longer flexi phone holder would allow you to do that.

The standard version measures 40cm (16″).

You can add and remove links but doing so does require some strength in your hands – you may need to get assistance with this.

Flexi Phone Holder For DSLR Cameras

The Flexi Phone Holder can also be used for holding a DSLR or SLR camera. For a camera, you will need one of our adaptor plates that screw into the base of your camera. These are available in either single or double bases and come with the phone patch(es) attached.

When attaching a heavier device like a DSLR camera, you may wish to use two of the phone holders to ensure a firm connection. We would advise this if you are using a camera with a long lens. The double camera base allows you to position the connection patches either one in front of the other or side by side.

If you wish to hold the camera at eye level, you can purchase 10 Extra Flexi Tube Links. We advise using two devices to hold your camera at eye-level for stability.

Gaming Controller Holder

Game with ease with our PS4, PS5 or Xbox controller holder attachments. These attachments come with a Phone Patch attached to connect to your Flexi Phone Holder arm. Combine with these new Gaming Controller Grips for a full grip-free gaming solution.

Bought a Flexi Phone Holder already but need some extra accessories? You can get them here: Flexi Phone Holder Accessories.

*Please note that you should ensure the phone patch is connected properly. Active Hands does not take any responsibility for devices that are damaged during use with our Flexi Phone holder.

Rail Mount Adaptor

After receiving feedback from our customers who use power chairs, we have designed an adaptor for wheelchair rails. The adaptor kit slides into the rail on your chair and provides a cylindrical base to attach the flexi phone holder to. To our knowledge, all wheelchairs that have a rail mount system have either the 20 or 30 series slots. The 20 series is smaller and the 30 series is larger. The Rail Mount Adaptor kit comes with everything you need to fit either.

The kit comes with:

• an adaptor
• 4x washers
• 2x 20 series T nuts
• 2x 30 series T nuts
• 2x 45mm bolts
• 2x 50mm bolts

This should enable fitting to the majority of wheelchair rails.

Card Holder

This card holder attaches to Flexi Phone Holder and allows you to have both hands free to add and remove cards. Having you cards closer to you stops others from taking a sneaky look too!

The card holder will hold up to 13 cards. The curved edges stop cards from falling out even when you are down to your last one and about to win the game!

Please follow the instructions included in your purchase when setting up your Flexi Phone Holder. Make sure it is not interfering with wheelchair function.